Türkçe 
English (UK) 
NEW! FSN Medical Technologies has solutions for managing your operating room video signals. Our products are engineered and built for compatibility with other highly specialized surgical and diagnostic equipment used in surgical suites, operating rooms, emergency rooms, and procedural facilities.
FS-P2602D, our enhanced 26” medical display, is uniquely equipped to handle tasks in the demanding OR environment.
- Rapid signal detection, robust mode tables
- Artifact-free HD images
- Fanless - sterile field compatible
- Built to last, rugged aluminum housing
- Calibrated to clinical color
- Image pan, zoom, freeze, picture-in-picture
General Features
| Item | Description |
|---|---|
| Panel | 26 inch enhanced TFT LCD (IPS) |
| Resolution | 1920 x 1080 (HD 1080) |
| Input Signal | 1 x DVI‐D 1 1 x DVI‐D 2 (Optional, Fiber DVI receiver DDL‐Rx, DSP‐Rx, DSL‐Rx detachable) 1 x D‐SUB 1 x BNC (SD/HD/3G‐SDI) 1 x BNC (CVBS) 2 x BNC (SVHS Y/C) 5 x BNC (Component Y/G, Pb/B, Pr/R, H/CS,VS Input) |
| Touch (Optional) | (Note: Depth and Weight will increase) |
| GPIO Port | SWAP, PIP / PBP1 / PBP2 Select, Record Indicator |
| Output Signal | 1 x DVI-D & 1 X BNC (SD/HD/3G-SDI) |
| Power Supply | AC / CD Adapter (AC 100~240V, DC 24V 6.25A) |
| Control Key | Power, Menu, PIP, Up, Down, Plus, Minus, Input |
| Unit Dimension | 638 (W) X 389 (H) X 74.7 (D) mm 25.12 (W) X 15.32 (H) X 2.94 (D) inch |
| Average Brightness | 500 |
| Response Time (G-to-G) | 8 ms (avg.) |
| Viewing Angle (CR>10) | R/L 178, U/D 178 |
| Weight | 7.6 kg, 16.8 lbs |
| Contrast Ratio | 1500:1 Typical |
| Pixel Pitch | 0.3 X 0.3 |
| Output Signal | Type | Description | |
|---|---|---|---|
| DVI | Type | Digital RGB | |
| Signal Format | TMDS single link | ||
| Connector | DVI‐D | ||
| SDI | SMPTE-424M | 1080p | |
| SMPTE-292M | 720p , 1080i | ||
| SMPTE-259M | 480i , 576i | ||
Signal Timing
| Input Signal | Type | Description | |
|---|---|---|---|
| VGA | Video | Type | Analog RGB |
| Connector | DSUB-15 | ||
| Level | 0.7Vp-p ±5% | ||
| Polarity | Positive | ||
| Impedance | 75 ohm ±5% | ||
| Horizontal Frequency | 30 ~ 93Khz | ||
| Vertical Frequency | 50 ~ 85 Khz | ||
| Applicable Maximum Pixel Frequency | 170 MHz | ||
| Maximum resolution | 1920x1080 / 60Hz (148.5MHz Timing, NON‐CRT) | ||
| Sync | Type | Separate H/V sync, Composite h/v sync, Sync on Green Automatic synchronization without external switch | |
| Level | TTL Level (V high ≥2.0V, V low ≤0.8V) | ||
| Polarity | Positive or Negative | ||
| Range | Automatic synchronization for applicable resolution modes which follows industrial standard within frequency range of 30 to 93KHz in horizontal and 50 to 85Hz in vertical | ||
| Terminal Resistance | more than 2 KΩ | ||
| DVI | Type | Digital RGB | |
| Signal Format | TMDS Single Link | ||
| Connector | DVI-D | ||
| CVBS | Type | C-Video | |
| Color System | NTSC, PAL | ||
| Signal Format | Composite Video Signal | ||
| SVHS Y/C | Type | S-Video | |
| Color System | NTSC, PAL | ||
| Signal Format | Y/C Separated Video Signal | ||
| SDI | SMPTE-424M | 1080p | |
| SMPTE-292M | 720p , 1080i | ||
| SMPTE-259M | 480i , 576i | ||
| Item | Type | Size |
|---|---|---|
| FS-P2602D Data Sheet | 892 KB |
