24" - model FS-L2402D

NEW! FSN Medical Technologies has solutions for managing your operating room video signals. Our products are engineered and built for compatibility with other highly specialized surgical and diagnostic equipment used in surgical suites, operating rooms, emergency rooms, and procedural facilities.

FS-L2402D, our 24” medical display, is uniquely equipped to handle tasks in the demanding OR environment.

 

 

 


  • LED backlight
  • Dual DVI in/out
  • Rapid signal detection, robust mode tables
  • Artifact-free HD images
  • Fanless - sterile field compatible
  • Built to last, rugged aluminum housing
  • Calibrated to clinical color
  • Image pan, zoom, freeze, picture-in-picture

General Features

Item Description
Panel 24 inch TFT LCD (LED)
Resolution 1920 x 1200 pixel (WUXGA)
Input Signal 2 x DVI-D
1 x SD/HD/3G-SDI (BNC)
2 x SOG
1 x VGA (D-sub)
1 x C-Video (BNC)
1 x S-Video (DIN)
1 x Component (RGBS, YPbPr) (5 x BNC)
Touch (Optional)
GPIO Port Swap, PIP / PBP1 / PBP2 Select, Record indicator
Output Signal 2 x DVI-D 1 x SD/HD/3G-SDI (BNC) 2 x SOG 1 x C-Video (BNC) 1 x S-Video (DIN) 1 x Component (RGBS, YPbPr) (5 x BNC)
Power Supply AC/DC Adaptor (AC 100-240V~, DC 24V 6.25A)
Control Key Power, Menu, PIP, Up, Down, Plus, Minus, Input
Unit Dimension 580 (W) x 386 (H) x 70 (D) mm 22.84 (W) x 15.20 (H) x 2.76 (D) inch
Average Brightness 600 (5 points avg.) cd/m2
Response Time (G-to-G) 14 ms (avg.)
Viewing Angle (CR>10) R/L 178, U/D 178
Weight 7.5 kg, 16.53 lbs
Contrast Ratio 1000 : 1 typical
Pixel Pitch 0.27 (W) x 0.27 (H)

Output Signal Type Description
DVI Type Digital RGB
Signal Format TMDS single link
Connector DVI-D
CVBS Type C-Video
Color system NTSC, PAL
Signal Format
SVHS Y/C Type NTSC, PAL
Color system NTSC, PAL
Signal Format
SDI SMPTE-424M 1080p
SMPTE-292M 720p, 1080i
SMPTE-259M 480i, 576i
Component Video Type Analog Y/G, Pb/B, Pr/R
Connector BNC
Level 0.7Vp-p ±5% (1.0Vp-p for sync embedded G/Y)
Polarity Positive
Impedance 75 ohm ±5%
Horizontal Frequency 30 ~ 93KHz
Vertical Frequency 50 ~ 85Hz
Applicable Maximum Pixel Frequency 170MHz
Maximum resolution 1920x1080 / 60Hz (148.5MHz Timing, NON-CRT)
Sync Type Separate H/V sync, Composite Sync. Automatic synchronization without external switch
Level TTL Level (V high ≥2.0V, V low ≤0.8V)
Polarity Positive or Negative
Connector BNC
SOG Type Sync on green
Input Signal Level 0.7Vp-p ±5%
Impedance 75 ohm ±5%
Input Signal Frequency 1920x1200 / 60Hz (154MHz Timing, NON-CRT)

Signal Timing

Input Signal Type Description
VGA Video Type Analog RGB, Analog YPbPr
Connector DSUB-15 (VGA), BNS (Component)
Level 0.7Vp-p ±5% (1.0Vp-p for sync embedded G/Y)
Polarity Positive
Impedance 75 ohm ±5%
Horizontal Frequency 30 ~ 93KHz
Vertical Frequency 50 ~ 85Hz
Applicable Maximum Pixel Frequency 170MHz
Maximum resolution 1920x1200 / 60Hz (154MHz Timing, NON-CRT)
Sync Type Separate H/V Sync, Composite Sync. Automatic synchronization without external switch
Level TTL Level (V high ≥2.0V, V low ≤0.8V)
Polarity Positive or Negative
Range Automatic synchronization for applicable resolution modes which follows industrial standard within frequency range of 30 to 93KHz in horizontal and 50 to 85Hz in vertical
Terminal Resistance more than 2KΩ
DVI Type Digital RGB
Signal Format TMDS single link
Connector DVI-D
Optical DVI Type Digital RGB
Signal Format TMDS single link
CVBS Type Analog Composite Video
Color System NTSC, PAL
Signal Format
SVHS Y/C Type NTSC, PAL
Color System NTSC, PAL
Signal Format
SDI SMPTE-424M 1080p
SMPTE-292M 720p, 1080i
SMPTE-259M 480i, 576i
SOG Type Sync on green
Input Signal Level 0.7Vp-p ±5%
Impedance 75 ohm ±5%
Input Signal Frequency 1920x1200 / 60Hz (154MHz Timing, NON-CRT)

Item Type Size
Data Sheet - FS-L2402D PDF 813 KB
TOP